Novel synthesis of sensor for selective detection of Fe+3 ions under various solvents

Naked-eye colored chemo dosimeter based on vanilline based conjugated sensor was synthesized and characterized. The main point of this paper is that the solvent also affects on selectivity of metals. Vanilline based conjugate sensor exhibited high selectivity and sensitivity for detection of Ferric ions (Fe⁺³) in all (both polar and nonpolar) solvents according to absorbance which can be observed by naked eye. The selectivity was more prominent in nonpolar or less polar solvent due to solubility factor of ions and sensor but not for polar. The detection of limit of the synthesized probes was shown up to 0.84 ppm. The dielectric constant of solvents affected on the complex formation of ligand with transition metal ions. A filter paper strip system was used for rapid monitoring of detection by color variation.     

γ-Valerolactone (GVL) as a green and efficient dipolar aprotic reaction medium

The great challenge for modern research is to define the most efficient tools to make more sustainable the industrial production and manufacturing. Among the different aspects that require attention the replacement of toxic and/or non-renewable solvents it is certainly playing a crucial role. Dealing with widely used dipolar aprotic solvents, among the different alternatives proposed in the literature γ-valerolactone (GVL) plays a pivotal role covering different application area. In this contribution, the benefits derived from the use of GVL as a circular, safe, biomass-derived reaction medium are highlighted covering most recent publications (2021). The presentation has been divided into three major sections: (i) biomass valorization, (ii) materials synthesis, manufacturing and recycle and (iii) new synthetic methodologies.     

Design,synthesis and evaluation of novel dehydroabietic acid-dithiocarbamate hybrids as potential multi-targeted compounds for tumor cytotoxicity

In the present study, novel representatives of the important group of biologically-active, dehydroabietic acid-bearing dithiocarbamate moiety, were synthesized and characterized by ¹H NMR, ¹³C NMR, HR-MS. The in vitro antiproliferative activity evaluation (MTT) indicated that these compounds exhibited potent inhibitory activities in various cancer cell lines (HepG-2, MCF-7, HeLa, T-24, MGC-803). Particularly, compound III-b possessed extraordinary cytotoxicity with low micromolar IC₅₀ values ranging from 4.07 to 38.84 µM against tested cancer cell lines, while displayed weak cytotoxicity on two normal cell lines (LO-2 and HEK 293 T). Subsequently, the potential mechanisms of representative compound III-b were elementarily investigated by Transwell experiment, which showed III-b can inhibit cancer cells migration. Annexin-V/PI dual staining showed that the compound can induce HepG-2 cells apoptosis in a dose-dependent manner. Meanwhile this apoptosis may be related to the upregulated protein expression of cleaved-caspase 3, cleaved-caspase 9, Bax and downregulated of Bcl-2 indicated by Western Blot. Later study further confirmed that ROS levels in HepG-2 cells increased significantly with the rise of concentrations. In addition, through the network pharmacology data analyzing, the core targets and signaling pathways of compound III-b for treatment of liver neoplasms were forecasted. Molecular docking model showed that compound III-b had high affinity with hub targets (CASP3, EGFR, HSP90AA1, MAPK1, ERBB2, MDM2), suggesting that compound III-b might target the hub protein to modulate signaling activity. Taken together, these data indicated that dehydroabietic acid structural modification following the “Molecular hybridization” principle is a feasible way to discover the potential multi-targeted antitumor compounds.     

Synthesis and properties of novel N,C,N terdentate skeleton based on 1,3-di(pyridin-2-yl)benzene moiety-new tricks for old dogs

Utilization of intermolecular Friedel-Crafts and intramolecular condensation reaction,novel 1,3-di-(pyridine-2-yl)benzene(N,C,N terdentate) skeleton with electro-withdrawing group in 6' position of pyridyl and a cyclization between 6' position of pyridyl and 6 position of benzyl ring were firstly designed and synthesized.The structures of these novel N,C,N terdentate were confirmed by NMR,MS and X-ray single crystalanalyses.The photophysical properties of these compounds were briefly explored.     

A facile synthesis of non-aqueous LiPO2F2 solution as the electrolyte additive for high performance lithium ion batteries

Constructing a reliable and favorable electrode-electrolyte interface is crucial to utilize the exceptional energy storage capability in commercial lithium-ion batteries. Here, we report a facile synthesis approach for the lithium difluorophosphate (LiPO₂F₂) solution as an effective film-forming additive via direct adding the Li₂CO₃ into LiPF₆ solution at 45 °C. Benefiting from the significantly reduced interface resistance (R_SEI) and charge transfer impedance (R_ct) of both the cathode and anode by adding the prepared LiPO₂F₂ solution into a baseline electrolyte, the cycling performance of the graphite||LiNi_0.5Mn_0.3Co_0.2O₂ pouch cell is remarkably improved under all-climate condition.     

K6In2Q6 (Q = S,Se, Te): Missing Links in the Series of Alkali Chalcogenido Ditrielates(III)

The chalcogenido indates K₆In₂Q₆ (Q = S, Se, Te) were synthesized from melts of the pure elements at a maximum temperature of 700 °C. All three potassium salts contain dinuclear units [In₂Q₆]^6– of two edge-sharing [InQ₄] tetrahedra. The sulfido and the selenido indate are isotypic and crystallize in the K₆Mn₂O₆-type structure [monoclinic, space group P2₁/c, a = 784.32(9)/809.32(3), b = 1274.58(14)/1322.37(4), c = 836.48(9)/870.53(3) pm, β = 97.900(2)/97.5877(8)°, Z = 2, R₁ = 0.0123/0.0109; for Q = S/Se]. The tellurido indate K₆In₂Te₆ crystallizes in a new orthorhombic structure type [space group Pnma, a = 1793.70(12), b = 1491.55(11), c = 837.40(6) pm, Z = 4, R₁ = 0.0157]. In this structure, the telluride anions form a hexagonal close packing, in which K⁺ cations occupy all octahedral voids; the In³⁺ ions take 1/6 (but always adjacent) tetrahedral voids. This structure-chemical relation to the h.c.p. packing, which is similarly found for most of the sodium dimetallates (e.g. Na₆Fe₂S₆), is substantiated by a full crystallographic group-subgroup tree. The crystal chemistry of the new indates is discussed and compared with that of alkali chalcogenido metallates(III) of Fe, Al and Ga containing [M₂Q₆]^6– dimers, which overall form as many as ten different structure types. DFT band structure calculations of the three title compounds exhibit bandgaps, which continuously decrease from the S to the Te compound and which are also in accordance with the pale yellow (S), bright yellow (Se) and red-brown (Te) color of the compounds. The chemical bonding in the salts and within the metallate anion is discussed on the basis of the partial DOS and a Bader analysis of the calculated electron density.     

Multimetallic Oxynitrides Nanoparticles for a New Generation of Photocatalysts

A versatile synthetic strategy for the preparation of multimetallic oxynitrides has been designed and here exemplarily discussed considering the preparation of nanoscaled zinc–gallium oxynitrides and zinc–gallium–indium oxynitrides, two important photocatalysts of new generation, which proved to be active in key energy related processes from pollutant decomposition to overall water splitting. The synthesis presented here allows the preparation of small nanoparticles (less than 20 nm in average diameter), well-defined in size and shape, yet highly crystalline and with the highest surface area reported so far (up to 80 m² g⁻¹). X-ray diffraction studies show that the final material is not a mixture of single oxides but a distinctive compound. The photocatalytic properties of the oxynitrides have been tested towards the decomposition of an organic dye (as a model reaction for the decomposition of air pollutants), showing better photocatalytic performances than the corresponding pure phases (reaction constant 0.22 h⁻¹), whereas almost no reaction was observed in absence of catalyst or in the dark. The photocatalysts have been also tested for H₂ evolution (semi-reaction of the water splitting process) with results comparable to the best literature values but leaving room for further improvement.     

Observation of unusual Griffith’s phase behavior in quadruple perovskite oxide CaCu3Mn4O12 (CCMO) synthesized through chemical route

The CaCu₃Mn₄O₁₂ (CCMO) ceramic was successfully synthesized through the chemical route. The phase formation was confirmed by the X-ray diffraction pattern. Thermogravimetric (TGA), FT-IR, SEM, TEM, EDX, and XPS analysis were performed for investigation of the thermal behavior, phase identification, microstructural analysis, elemental analysis and oxidation state of the CCMO ceramic respectively. FT-IR spectra confirmed the existence of MnO₆ octahedral in body-centered cubic (BCC) complex perovskite oxide that resembles the CaCu₃Ti₄O₁₂ structure. The average particle size was observed by TEM in the range between 100 and 200 nm. AFM shows the average roughness of the surface was found to be in the range of 30 ± 5 nm. XPS and EDX studies confirmed the purity and oxidation state of the CCMO ceramic. The synthesized material shows very interesting unique Griffith’s phase (T_G) results that arise disorder in magnetic susceptibility in which ferromagnetic transition was to be observed in the paramagnetic region.     

Recent advances in application of the graphene-based membrane for water purification

Graphene is an atomic layer thick carbon-based material with unique two-dimensional architecture and extraordinary physiochemical, optical, electrical, and mechanical properties. Graphene and its derivatives show significant promises for the development of nanoporous ultrathin filtration membranes capable of molecular separation properties. Graphene-based nanofiltration membranes featuring distinct laminar structures can offer various novel mass-transport phenomena for purifying water, energy storage and separation, gas separation, and proton conductors. The latest developments in water purification techniques through graphene-based membranes including engineering, design, and fabrication of diverse graphene, graphene-oxide, and graphene-composite membranes are provided here in relation to their application paradigm for purifying water. The critical views on pollutant removal mechanisms for water purification along with optimization measures are specially highlighted. In addition, the challenges, shortcomings, and future prospects are pointed out. The green and large-scale synthesis technology of graphene coupling with advanced membrane fabrication techniques can promote these state-of-the-art nanofiltration membranes for a wide range of applications.     

Synthesis of Conjugated Polymers via Transition Metal Catalysed C−H Bond Activation

Transition metal catalysed C−H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C−C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C−H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C−H/C−X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C−H/C−H cross-coupling protocols driven by the activation of monomers’ C(sp²)−H bonds. Furthermore, poly(annulation) via C−H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C−H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C−H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C−H activation polymerization to prepare conjugated polymers were discussed and commented.